-Fold paper in half diagonally to form a triangle -Fold the outer tips in to the middle -Fold the outer flaps to the middle like you would do a plane -Unfold and push flaps into the middle -Turn over and repeat pre-folds 3 and 4

1. Fold the flap nearest to you up.

2. Turn the left side over to the right.

3. Fold the lower tip up.

4. Fold the upper wing exactly on the fold below it.

5. Unfold and repeat the last step but fold the left wing.

6. Unfold the wing again and turn the wing to the left at the just created crease.

7. Turn the figure over and turn the top wing over to the right.

8. Turn the lower top portion up (repeat step 4-6).

9. Turn the right wing to the left.

      10. Turn the figure over and turn the             top portion of the wing to the left.

      11. Fold the upper wings to the center.

      12. Turn the figure over and push the            upper left and right comers inside the          figure. Fold the lower triangle up at the          crease and down above the crease.

13. Turn the figure over and fold it in half at the center axis.

14. Pull up the right portion and press the fold together.

15. For the head, open the upper tip and fold it inside.

16. Hold the head and pull it down creating the ears. Press together firmly.

       17. Open the form slightly and pull up          the tail. Fold the tail as you wish. This         is the finished basset hound.