Photo Interactive - Loading Film into a Yashica

..Loading a Yashica-D

Using Kodak T-MAX 125


1. Turn camera so that bottom is facing you. Twist the knob counter clock-wise until the door opens.	2. Open back completely and remove old spool from lower film cavity. Replace the old spool in the higher cavity.

3.After inserting the film in the lower film cavity, make sure the spool shafts have locked the new spool in place.	4. Feed the film lead into the old spool.

5. Wind the film using the film advance knob. Turn it around until the arrows on the film are aligned with the ones on the camera.	6. Close the camera door and turn the camera tripod socket in the direction marked "C".

7. Advance the film to the first frame by winding the film advance know until the counter reads "1".