home made soap process


May. 03, 2009

Excess Bathroom Soap Making The Blender

While the blender is not able to scale, but this process has several advantages:


• Mixing soap you will more quickly reach the stage "trace". Usually from 15 - 40 minutes, use blender only take a few minutes, even seconds depending on the oil used.

• Because oil is liquid at room temperature melt, the process can run at room temperature and does not require a thermometer.

• Blender is very effective in NaOH solution scramble / KOH - water in the oil soap mixture that produces a more smooth.

(For Some Recipes 500 grams).

May. 03, 2009

Making Ways

  • First Step

    Prepare the mold. mold can be anything. Can oiled the brass, plastic tray layered a thin plastic or PVC pipe that oiled. Prepare the mold enough to accommodate all the results of making soap. Printed: To print, you can use wood or plastic coated cardboard is thin, even PVC pipe can be used. If using a PVC pipe cap with the bottom of the plastic tied with a rubber bracelet, semprotkan oil in it, pour the soap. After indurate the cover open, push will ago cut the yield rounded soap.

  • Second Step

    weigh the water and NaOH / KOH. pour NaOH / KOH in water to cool / cold (Do not use aluminum vessel. Use stainless steel, pyrex glass or plastic-poliproplen). Do not pour water to the NaOH / KOH. Pour NaOH / KOH into the water little by little. mix it until late. First will hot solution and white colored. After all dissolved, store in safe place until cooled to room temperature. It will be a clear solution.

  • Third Step

    oil balanced in accordance with the prescription

  • Fourh Step

    Pour the oil is to be pondered in the blender.

  • Step Five

    Be careful pour solvent NaOH / KOH in the oil

  • Sixth step

    Place the blender cover, put the cloth on the cover to avoid splash earlier and the lowest round of the process. Separate Avoid lest to your face or body. Stop the blender and check to see the soap "trace". "Trace" is a condition where the soap and have the end of the stir process . Sign is when the mixture began to curdle soap. When in touch with the spoon, then spoon some seconds before the former imprint, why it is called "trace".

  • Seventh Step

    At "trace" before you can add fragrance, coloring or aditif. Poke a few seconds and then stop lap blender.

  • Eighth Step

    Pour results in this soap molds. Close to the cloth for insulation. Store the soap in the mold during the earlier one to two days. Then remove from the mold, cut according to taste. Store at least 3 weeks before use.