Bandhani- Tie and Dye |
||
|
|
TIE & DYE DESIGNS- 11. Square-TriangleThis design has a square at the center and triangles at all the four corners. 2. Semi-Circle DesignWe take a piece of cloth and draw semicircles on all the four sides. To keep the opposite two semicircles white, we cover it with thread by the help of Needle. Now, we put the cloth in a tub of yellow color. After drying it, we open the semicircles, which we had covered with thread. Now we cover the semicircle, which we have colored yellow. Now we color the remaining two semicircles with a light color and the remaining cloth with any dark color. We can use this design on blouses, suits, etc 3. Corners in Two ColorsDraw lines on the corners & do running stitch & pull the thread to wrinkle it. Then cover it with thread. Dip it in yellow color. Then cover the last corner & hold a pinch of cloth in the centre & cover with thread and dip in the red color. 4. Diamond DesignMake lengthwise diamonds on the cloth & do running stitch on the design outlines. Then with a gap of one inch, dip it in yellow color. After drying, cover the yellow portion & dip it in red color & dry it. Then cover it with thread & dip in black color and dry it. After doing all this pull all the stitches & see the diamond on the cloth piece. 5. Circle DesignTake a square piece of cloth and keep in on a plane surface. Make four circles on the cloth, each with one-inch radius bigger than the smaller one. 6. GROUNDNUT DESIGNGroundnut shells are used in between in this design to tie the knot. Then, when the dying is complete, we get an interesting pattern.
|
1. Square- Triangle
2. Semicircle Design
3. Corners in Two Colors
4. Diamond Design
5. Circle Design
6. Groundnut Design |
|
Website design credit to Craig Hamnett (through oswd.org, with copyright permission) |
||