WiFi is the wireless way to handle networking. It is also known as 802.11 networking and wireless networking . The big advantage of WiFi is its simplicity. You can connect computers anywhere in your home or office without the need for wires. The computers connect to the network using radio signals, and computers can be up to 100 feet or so apart.

Here, we will discuss two different aspects of WiFi. First we will discuss the basic technology that makes WiFi networking possible. Then we will discuss the hardware you need to create a WiFi network, and help you understand how to set up and access a WiFi hotspot in your home.

The Walkie-Talkie Network
If you want to understand wireless networking at its simplest level, think about a pair of $5 walkie-talkies that you might purchase. These are small radios that can transmit and receive radio signals. When you talk into a Walkie-Talkie, your voice is picked up by a microphone, encoded onto a radio frequency and transmitted with the antenna. Another walkie-talkie can receive the transmission with its antenna, decode your voice from the radio signal and drive a speaker .

Simple walkie-talkies like this transmit at a signal strength of about 0.25 watts, and they can transmit about 500 to 1,000 feet.

Let's imagine that you want to connect two computers together in a network using walkie-talkie technology:

• You would equip each computer with a walkie-talkie.
• You would give each computer a way to set whether it wants to transmit or receive.
• You would give the computer a way to turn its binary 1s and 0s into two different beeps that the walkie-talkie could transmit and receive and convert back and forth between beeps and 1s/0s.

This would actually work. The only problem would be that the data rate would be very slow. A $5 walkie-talkie is designed to handle the human voice (and it's a pretty scratchy rendition at that), so you would not be able to send very much data this way. Maybe 1,000 bits per second.

WiFi's Radio Technology
The radios used in WiFi are not so different from the radios used in $5 walkie-talkies. They have the ability to transmit and receive. They have the ability to convert 1s and 0s into radio waves and then back into 1s and 0s. There are three big differences between WiFi radios and Walkie-talkies:

• WiFi radios that work with the 802.11b and 802.11g standards transmit at 2.4 GHz, while those that comply with the 802.11a standard transmit at 5 GHz. Normal walkie-talkies normally operate at 49 MHz. The higher frequency allows higher data rates.
• WiFi radios use much more efficient coding techniques that also contribute to the much higher data rates. For 802.11a and 802.11g, the technique is known as orthogonal frequency-division multiplexing (OFDM). For 802.11b, it is called Complementary Code Keying (CCK).
• The radios used for WiFi have the ability to change frequencies. 802.11b cards can transmit directly on any of three bands, or they can split the available radio bandwidth into dozens of channels and frequency hop rapidly between them. The advantage of frequency hopping is that it is much more immune to interference and can allow dozens of WiFi cards to talk simultaneously without interfering with each other.

Because they are transmitting at much higher frequencies than a Walkie-Talkie, and because of the encoding techniques, WiFi radios can handle a lot more data per second. 802.11b can handle up to 11 megabits per second (although 7 megabits per second is more typical, and 802.11b may fall back as low as 1 or 2 megabits per second if there is a lot of interference). 802.11a and 802.11g can handle up to 54 megabits per second (although 30 megabits per second is more typical).

You might be wondering where the funny 802.11 nomenclature comes from. The Institute of Electrical and Electronics Engineers (IEEE) creates standards, and they number these standards in unique ways. The 802.11 standard covers wireless networks. The a, b and g notations identify different flavors of the 802.11 standard:

• 802.11b was the first version to reach the marketplace. It is the slowest and least expensive of the three. As mentioned above, 802.11b transmits at 2.4 GHz and can handle up to 11 megabits per second.
• 802.11a was next. It operates at 5 GHz and can handle up to 54 megabits per second.
• 802.11g is a mix of both worlds. It operates at 2.4Ghz (giving it the cost advantage of 802.11b) but it has the 54 megabits per second speed of 802.11a.

Fortunately, all of this radio technology is hidden in a WiFi card and is completely invisible. WiFi, in fact, is one of the easiest technologies that you will ever use.

Adding WiFi to a Computer
One of the best things about WiFi is how simple it is. Many new laptops already come with a WiFi card built in -- in many cases you don't have to do anything to start using WiFi. It is also easy to add a WiFi card to an older laptop or a desktop PC . Here's what you do:

• Buy a 802.11a, 802.11b or 802.11g network card. 802.11g has the advantage of higher speeds and good interoperability on 802.11b equipment.
  • For a laptop, this card will normally be a PCMCIA card that you slide into a PCMCIA slot on your laptop. Or you can buy a small external adapter and plug it into a USB port.
  • For a desktop machine, you can buy a PCI card that you install inside the machine, or a small external adapter that you connect to the computer with a USB cable.
• Install the card
• Install the drivers for the card
• Find an 802.11 hotspot
• Access the hotspot.

A hotspot is a connection point for a WiFi network. It is a small box that is hardwired into the Internet . The box contains an 802.11 radio that can simultaneously talk to up to 100 or so 802.11 cards. There are many WiFi hotspots now available in public places like restaurants, hotels, libraries and airports . You can also create your own hotspot in your home, as we will see in a later section.

Configuring WiFi
On the newest machines, an 802.11 card will automatically connect with an 802.11 hotspot and a network connection will be established. As soon as you turn on your machine, it will connect and you will be able to browse the Web, send email, etc. using WiFi. On older machines you often have to go through this simple 3-step process to connect to a hotspot:

• Access the software for the 802.11 card -- normally there is an icon for the card down in the system tray at the bottom right of the screen.
• Click the "Search button" in the software. The card will search for all of the available hotspots in the area and show you a list.
• Double-click on one of the hotspots to connect to it.

On ancient 802.11 equipment, there is no automatic search feature. You have to find what is known as the SSID of the hotspot (usually a short word of 10 characters or less) as well as the channel number (an integer between 1 and 11) and type these two pieces of information in manually. All the search feature is doing is grabbing these two pieces of information from the radio signals generated by the hotspot and displaying them for you.

WiFi Security
WiFi hotspots can be open or secure. If a hotspot is open, then anyone with a WiFi card can access the hotspot. If it is secure, then the user needs to know a WEP key to connect.

WEP stands for Wired Equivalent Privacy, and it is an encryption system for the data that 802.11 sends through the air. WEP has two variations: 64-bit encryption (really 40-bit) and 128-bit encryption (really 104-bit). 40-bit encryption was the original standard but was found to be easily broken. 128-bit encryption is more secure and is what most people use if they enable WEP.

For a casual user, any hotspot that is using WEP is inaccessible unless you know the WEP key.

If you are setting up a hotspot in your home, you may want to create and use a 128-bit WEP key to prevent the neighbors from casually eavesdropping on your network.

Whether at home or on the road, you need to know the WEP key, and then enter it into the WiFi card's software, to gain access to the network.

BACK